My stepfather threw out my door panels!. Got itchy and decided to fabricate something. heres what i did.
Daimond Soft Anti-Fatigue Mat (Home Depot about $15 a sheet)
Small drill bit
Sheet metal shears or scissors
Self tapping metal screws
With the door off, if you can, lay the door on the ground and go ahead and start measuring, and marking off were you want to cut.
Trim the corners and cut the rectangle out for the door handle, I covered were the window/door controls were cuz mine have been relocated. Make sure to be presise because you will be using this as a template for the other door. This will make the process alot faster for the other door.
Now take your other sheet of Anti-Fatig